How to setup wireless printer – Samsung Laser Printers — How to Set up Wireless printing via USB for macOS

Samsung Laser Printers — How to Set up Wireless printing via USB for macOS

To set up wireless features, follow these steps.

  1. Connect the USB cable to the USB port on the printer, and then connect the other end to the Mac computer.

  2. After the connections are complete, open the wireless setup by running the Wireless Setting application.

    note:

    Figure : Example of the EasyWireless Setup Wireless Setting

  3. Main installation screen shows the main Samsung Easy Wireless Setup page. Click Next, to start set up.

    Figure : Example of the main Samsung Easy Wireless Setup, and clicking Next

  4. Select the wireless setup method. For initial setup with a printer not connected to the network, select ‘Using a USB cable option’, and then click Next.

    Figure : Example of selecting a wireless setup method

  5. Temporarily connect the printer to your Mac computer if you have not done so already, and then click Next.

    Figure : Example of temporarily connecting the devices using the USB cable

  6. The Installation Wizard searches for any connected devices and retrieves the wireless information.

    — If the printer is not found, A Printer Not Found dialog appears. Check the USB connection between the printer and the Mac computer, and then click

    next on the Printer Not Found dialog. Try a different USB cable if available.

    — If the printer is still not found, the Printer Not Found dialog box reappears. verify that the printer is powered on and is ready to print, and then click

    next on the printers Not Found dialog.

    Figure : Example of Checking the Device

  7. A list of wireless networks that the printer can see appears. Select your network, and then click Next(Wireless Network Security Dialog appears). If your network does not appear, try the following:

    • Make sure your wireless router or access point is broadcasting on the 2.4Ghz band, not 5Ghz. Samsung printers do not currently have 5Ghz capability.

    • See if another wireless device can get a good signal (at least 2 bars consistently) in the same spot. Bear in mind that antenna strength varies between devices; if your laptop or phone is only able to get one bar of signal it is likely the printer will not be able to get a consistent signal at all.

    • If you have verified there is a consistent good signal but the printer does not see the network, click Advanced Settings, and then enter your network information manually.

    Figure : Example of searching for detectable wireless networks

  8. Type the Security Key (WEP/WPA/WPA2) in the network password: field and then click Next.

    note:

    If you do not know what your Security Key is, contact your network administrator or the manufacturer of your router/access point for assistance.

    Figure : Example of Wireless Network Security

  9. Wait for the printer to connect to the network.

    Figure : Example of Wireless Network Connecting

  10. Wi-Fi Direct information appears. If you would like Wi-Fi Direct turned on make sure the check box is selected, and then write down the password. Once selected, click Next.

    Figure : Example of the Wi-Fi Direct Settings

  11. A prompt displays stating that connection is complete. Click Next or Finish? to continue.

    Figure : Example of the Wireless Network Setting Complete

  12. The setup is complete. Go to the Print and Scan in System Preferences to see your printer.

    Figure : Example of Print and Scan

support.hp.com

Connecting your HP wireless printer | Wireless Printing Center


HP Auto Wireless Connect – HP Auto Wireless Connect is a technology that allows you to connect your printer to your wireless network automatically without having to connect any cables or enter your wireless network settings such as your network name or password. Many newer HP printers will have this capability during the standard software installation process.

To use this option, install the software for your printer and follow the onscreen instructions. When prompted, select the «Network (Ethernet/Wireless)» connection type and then choose «Yes, send my wireless settings to the printer (recommended)». That’s it! The HP software will do the rest.

Not all computers or network configurations are compatible with HP Auto Wireless Connect. In these cases, an alternate wireless setup method will be offered. To be compatible with HP Auto Wireless Connect, the following conditions must be met:

  1. Your computer uses Windows Vista (and newer) and Mac OS X 10.5 (and newer).
  2. Your computer uses a wireless connection to your network and the operating system is in control of the wireless adapter so that the HP Software can retrieve the computer’s current network settings.
  3. Your computer is connected to your network over 2.4GHz. NOTE: Some HP Printers are not compatible with 5.0 GHz networks. You may still be able to connect the printer to your network using other setup methods as long as your router also supports 2.4GHz (as most do). Please go to the section on Routers to learn more. Additional setup methods are shown on this page
  4. Your computer does not use a  
    static IP address
  5. Your printer is in HP Auto Wireless Connect mode. The printer will be in this mode for two hours after it is first powered on during installation before it is connected to a network. TIP: If your printer has been powered on for more than two hour and the software has not yet tried to connect the printer to your wireless network, you can reset this mode by using the “Restore Network Settings” or “Restore Network Defaults” option from the printer control panel. Usually found under the Network menu or by touching the wireless icon (or button) and then going to “Settings” or gear icon. Refer to your printer documentation for more information on this.

Other environmental and technical factors may also affect whether HP Auto Wireless Connect is offered.

If HP Auto Wireless Connect is offered during the installation of your printer, it is the recommended setup method. Part of the setup process requires your computer to be temporarily disconnected from your wireless network. During this time you will not have Internet access. Be sure to save any online work and/or downloads before continuing with this setup method.

If HP Auto Wireless Connect is not offered during the software installation or if it is not successful, you will be guided to use another wireless setup method.

www8.hp.com

Installing HP wireless printer software | Wireless Printing Center

Installing printer software

To ensure you have the latest software, we recommend that you download software for your printer and computer. Make sure you select the software that is intended for both your computer operating system and your printer model. The computer you are installing the printer software on must be connected to the same network you are connecting the printer to.

  1. Follow the on-screen instructions until you are prompted for Connection Type.
  2. Select either «Through the Network«, «Network«, or «Wireless» when prompted.
    • The wording will depend on the version of software you are installing.
    • In some cases the software may automatically find your wireless settings for you.
  3. Follow the on-screen directions to finish installing the software for your printer.

If you have already connected the printer to your network and are now installing the software, the printer should be discovered automatically during the installation process. Note that the computer you are installing the software on must be connected to the same network as the printer.

Sometimes the software has difficulty finding the printer over the network. If this happens, you will have a chance to do an «advanced search» for the printer using the printer’s assigned IP address. You can find the  
IP address by printing either the Wireless Network Test report or a Network Configuration page. For printers with displays, the IP address should be shown on the display when the wireless ICON or button is touched.

If this is a first time installation for a printer without a display and you are using the USB setup of the wireless method, the software will not find the printer on the network and you will be guided through creating a wireless connection for the printer. You will temporarily connect a USB cable between the printer and your computer. Do not connect the USB cable until the software instructs you. The computer you are installing the printer software on must be connected to the same network you are connecting the printer to.

www8.hp.com

How To Setup A Wireless Printer

How To Setup A Wireless Printer, wireless printers are a versatile choice that supports the printing requirements of little to mid-sized services. Wireless printers can enable essentially anybody utilizing your network to print files rapidly and problem-free. They are perfect alternatives for companies that use turning personnel, experts or anybody who wants to prevent the need of needing to link their gadget to obtain network access to print.

Wired printers relatively use ease-of-use; nevertheless, their plug-and-print alternative sacrifices versatility and failure to accommodate mobile users. Wireless printers do need some technical understanding to carry out. Nevertheless, most organizations will discover the advantages to be well worth the time invested.

Read more: How To Make A Printer Wireless

This basic guide will stroll you through the most typical approaches to link a cordless printer to your network; bear in mind that there will be some variation while doing so based on your printer( s) and network connections. You need to constantly describe the guidelines particular to your design of printer when in doubt.

CHOICE 1: UTILIZING AN GAIN ACCESS TO POINT

Linking a printer to a cordless gain access to point on a business’s network is the most typical technique for linking a mobile phone. Linking using a gain access to point uses the facilities mode of all cordless gadgets and allows users to print from any gadget linked to the Wi-Fi, without the additional effort of connecting a computer system to the printer to run the preliminary setup.

To do this you will have to set up the printer motorist on a computer system currently linked to the network. Next, established the Wi-Fi on the printer. This is most frequently done through your printer’s Setup Wizard, which will ask you a series of concerns about your network (SSID, network password, and security procedure).

If DHCP (Dynamic Host Setup Procedure) is made it possible for, an IP address need to be designated instantly, otherwise an IP address will have to be by hand appointed. Keep in mind: Some printers will need a USB connection to the computer system setting up the chauffeur, so the info interacts instantly. When the details are supplied to the printer, the connection needs to be made instantly. How To Setup A Wireless Printer.

Read more: Walmart Wifi Printer

CHOICE 2: DIRECT LINKS

Rather than the alternative above, where all cordless gadgets link through a gain access to the point, these choices straight link the cordless gadgets to the printer(s). If the gain access to point alternative discussed above isn’t utilized, advertisement how was initially the very first choice to wirelessly link gadgets straight. On more recent printing gadgets nevertheless, Wi-Fi Direct is an alternative direct link alternative.

You will have to guarantee your printer will enable ad-hoc mode and examine the handbook consisted of to choose its usage in your particular printer menu. Linking using ad-hoc is performed in the same technique as linking through a gain access to the point. Setting up the printer motorists onto the computer system you want to print from will enable you to link without making use of a gain access to the point.

Wi-Fi Direct is even easier to utilize, nevertheless, it is not a typical choice of the majority of existing printers. If your printer has this function, you just have to allow it from the menu. On the computer system, you want to print from, choose your cordless icon from your tray and discover the cordless printer.

If the printer is password allowed, you will merely have to go into the password then you ought to have the ability to print to this printer. If you have the problem, you might have to run a setup choice to discover the appropriate printer chauffeur. Wi-Fi Direct masters being easy to use and reveal fantastic pledge for future cordless printing versatility.

If you follow these actions and still have the problem linking the printer to the network, return the printer’s settings to the factory defaults and re-attempt the setup by rerunning the Setup Wizard. Constantly validate the printer you are making use of has Wi-Fi abilities.

How To Setup A Wireless Printer If printer setup (and management) isn’t your location of knowledge, think about dealing with a Managed Print Solutions company. They have the proficiency to take most print associated jobs and concerns off your plate, enabling you to concentrate on your service top priorities. Speak with a Photo copier and Printer Expert to talk about the chances offered for cordless printing in your business.

How To Setup A Wireless Printer

4.5
5

Alfian Adi Saputra
3/4/17

How To Setup A Wireless Printer,  wireless printers are a versatile choice that supports the printing requirements of little to mid-sized se…

www.howtoinstallprinterdriver.com

How to Set Up a Wireless Printer on a Mac

by Bennett Gavrish

Wireless printers can be used in a home office or business office so that one printer can service many computers. With a wireless printer, you can print documents from a Mac computer without directly connecting the computer to the printer. This is helpful in offices where network wiring does not exist or in temporary offices where you don’t want to invest the time and money to install a wired network. You also may want a wireless printer in your home so that all family computers can print to just one printer without cluttering up your home with cables.

1

Select your Wi-Fi network using the printer’s built-in controls. You may be prompted to enter your network username and password if it is a secured network.

2

Install on your Mac the necessary printer driver from the CD that came with your printer. If no CD came with your printer, go to the manufacturer’s website and download the software for your printer model.

3

Select «System Preferences» from the Dock.

4

Select the «Print & Fax» control panel in the Hardware section.

5

Click the «+» icon on the left side of the control panel.

6

Select the «IP» tab at the top of the pop-up window and choose «Internet Protocol IPP» from the list of available protocols.

7

Type in your wireless printer’s IP address and queue name.

8

Select the correct printer driver from the «Print Using» drop-down menu.

9

Click the «Add» button to finish setting up the wireless printer. The printer will now show up as an available device the next time you print a document.

About the Author

Bennett Gavrish is an I.T. professional who has been writing about computers, electronics and the Web since 2004. His work has appeared in the «Nashua Telegraph» and the «Daily Free Press» and on numerous websites. Gavrish received a bachelor’s degree in journalism from Boston University.

More Articles

itstillworks.com

Samsung Laser Printers — How to Set up Wireless printing via USB for macOS

To set up wireless features, follow these steps.

  1. Connect the USB cable to the USB port on the printer, and then connect the other end to the Mac computer.

  2. After the connections are complete, open the wireless setup by running the Wireless Setting application.

    note:

    Figure : Example of the EasyWireless Setup Wireless Setting

  3. Main installation screen shows the main Samsung Easy Wireless Setup page. Click Next, to start set up.

    Figure : Example of the main Samsung Easy Wireless Setup, and clicking Next

  4. Select the wireless setup method. For initial setup with a printer not connected to the network, select ‘Using a USB cable option’, and then click Next.

    Figure : Example of selecting a wireless setup method

  5. Temporarily connect the printer to your Mac computer if you have not done so already, and then click Next.

    Figure : Example of temporarily connecting the devices using the USB cable

  6. The Installation Wizard searches for any connected devices and retrieves the wireless information.

    — If the printer is not found, A Printer Not Found dialog appears. Check the USB connection between the printer and the Mac computer, and then click

    next on the Printer Not Found dialog. Try a different USB cable if available.

    — If the printer is still not found, the Printer Not Found dialog box reappears. verify that the printer is powered on and is ready to print, and then click

    next on the printers Not Found dialog.

    Figure : Example of Checking the Device

  7. A list of wireless networks that the printer can see appears. Select your network, and then click Next(Wireless Network Security Dialog appears). If your network does not appear, try the following:

    • Make sure your wireless router or access point is broadcasting on the 2.4Ghz band, not 5Ghz. Samsung printers do not currently have 5Ghz capability.

    • See if another wireless device can get a good signal (at least 2 bars consistently) in the same spot. Bear in mind that antenna strength varies between devices; if your laptop or phone is only able to get one bar of signal it is likely the printer will not be able to get a consistent signal at all.

    • If you have verified there is a consistent good signal but the printer does not see the network, click Advanced Settings, and then enter your network information manually.

    Figure : Example of searching for detectable wireless networks

  8. Type the Security Key (WEP/WPA/WPA2) in the network password: field and then click Next.

    note:

    If you do not know what your Security Key is, contact your network administrator or the manufacturer of your router/access point for assistance.

    Figure : Example of Wireless Network Security

  9. Wait for the printer to connect to the network.

    Figure : Example of Wireless Network Connecting

  10. Wi-Fi Direct information appears. If you would like Wi-Fi Direct turned on make sure the check box is selected, and then write down the password. Once selected, click Next.

    Figure : Example of the Wi-Fi Direct Settings

  11. A prompt displays stating that connection is complete. Click Next or Finish? to continue.

    Figure : Example of the Wireless Network Setting Complete

  12. The setup is complete. Go to the Print and Scan in System Preferences to see your printer.

    Figure : Example of Print and Scan

support.hp.com

How to Set Up a Printer to Print From a Wireless Router

Related Articles

Setting up a wired printer to print wirelessly can be accomplished by connecting it directly to your wireless router and completing a basic configuration on your Mac or Windows operating system. Once you have set up the printer, it will be available to any computer on your network. Your wired printer should have an Ethernet port or a USB cable that you can use to connect directly to your router. When possible, choose the Ethernet cable since these cables are typically more reliable, reach a longer distance and generally provide higher performance and compatibility compared to other cable types.

Connect the Wired Printer

Step 1

Connect one end of an Ethernet cable or USB cable to an available port on your printer. Then, connect the other end to an available port on the back of your wireless router. Not all routers support USB connections, but most routers have extra Ethernet ports to connect devices.

Step 2

Plug the printer into a nearby wall outlet using the supplied power cable.

Step 3

Turn on the printer and wait for the device to finish running its startup procedure. Most inkjet printers run a basic cleaning task each time the printer is powered on; laser printers typically are available to the network immediately.

Step 4

Unplug the power from the back of your wireless router, wait 10 seconds and then plug it back in if you experience any issues when you try and set up your printer on your network.

Windows Setup

Step 1

Click the «Start» button and select «Devices and Printers.»

Step 2

Click «Add a Printer» and select «Add a Network, Wireless or Bluetooth Printer» in the Add Printer window.

Step 3

Select the printer you recently connected to the network and click «Next.»

Step 4

Click «Install Driver» and enter an administrator username and password, if prompted.

Step 5

Continue to follow the prompts in the wizard and click «Next.»

Mac Setup

Step 1

Click the «Apple» menu and select «System Preferences.»

Step 2

Click «Print & Scan.»

Step 3

Click the «Lock» button and provide administrator credentials, if necessary. Click the «+» button and select your printer from the list. Wait for the printer to download and install the wireless printer.

yourbusiness.azcentral.com

Отправить ответ

avatar
  Подписаться  
Уведомление о