How to rip a dvd – How to Rip a DVD with VLC

How to Rip a DVD with VLC

DVDs obviously aren’t a widely used physical format anymore, but there still might come a time where you need to rip one. Whether pulling data and files from an older DVD or just attempting to digitize your DVD collection so you can quit sorting through physical media, VLC has you covered.

1. Open VLC.

2. Under the Media tab, go to Convert/Save.

3. Click on the Disc tab.

4. Choose the DVD option under Disc Selection. If you find yourself running into errors later, come back and select the No disc menus option too. It’s not usually needed, but just in case.

5. Choose the DVD drive location.

6. Click Convert/Save at the bottom.

7. Select the codec and particulars you’d like to use for the rip under Profile.

8. Click the Browse button and select the destination and filename for the finished rip, and then press Save.

9. Click Start.

www.laptopmag.com

How to Rip a DVD and Upload the Clip to YouTube Site

See more about: All-in-one Blu-ray Converter to Convert Blu-ray & DVD & Video & Audio to format you need

I have a lot of concert DVDs and movies that I’d like to put some of portions onto YouTube, what tools can I use to convert a DVD to a format that is accepted by YouTube, can someone point me in the right direction?

Nowadays, with the rapid expansion of digital technologies and the development of the Internet, we are seeing movies hit the digital age, allowing personal entertainment to reach a new level of convenience. The physical discs have been replaced with stored digital copies, we’re watching content from YouTube and other streaming sites and services, we have been downloading files onto our computer…If there’s a DVD happening at your hand, you’ll probably extract the movies out and then upload the movie clips of DVD straight to YouTube so that all the friends can visit it around the world.

Back then, you would know how to copy videos to YouTube, what if the video encrypted in a commercial DVD you purchase to YouTube through your Mac or Windows computer? Obviously you can’t put that DVD video onto YouTube directly as there is restriction on the disc. While there are numbers of DVD ripping programs available for extracting videos from DVD images and convert to more compressed, more compatible YouTube formats, I suggest DVD Ripper, a good converter that it can take care of all of this for you.

The application gives the ability to convert DVD videos to YouTube file and across different formats. That’s just the beginning, though; it also offers a wide range of presets designed to convert files for playing devices, from Android phones to Apple iOS devices and more. Whether you want to create a basic YouTube compliant file from DVD, or a custom file with tweaking options, the software has everything you need.

Note, the software is available for Mac OS, so if you would like to rip DVDs to a YouTube video file on a Mac machine, please go and use DVD Ripper for Mac to get the job done.

Step 1: Load DVD files

Run DVD Ripper, insert the DVD disk and go to «Load Disc» on the top menu bar, and navigate to the DVD files you want to add.

Step 2: Choose a YouTube suitable format

Frequently, videos posted on YouTube site are in the form of *.mp4, *.webm, or *.mov. So if you want to convert a DVD video and upload it to YouTube, here we suggest using MP4 as it has a good compatibility with older browsers. Added benefits of using the mp4 format is that it is much more lightweight in bandwidth than the other YouTube readable file formats.

Click «Profile» pull-down menu at the bottom left side of the interface, this will display the format choosing panel, move to «Streaming Video» category, and select YouTube Video (*.mp4).

You can then easily alter compression rates in the settings after selecting a format, by clicking the «Settings» button next to «Profile» to manage the final video size.

However, The default settings are good enough for online video so we don’t really need to fine tune them. you’ll be fine if you stick to them.

One important property of this DVD to YouTube ripper is it comes with a group of preset profiles to convert DVD videos for multimedia players. It converts DVD video to the exact size of handheld device screen. You may want to put the DVD movies onto a mobile device you happen to have.

If this is the case, just choose a preset (as long as there have the template) and you are good to go!

Step 3: Rip movies from disc to YouTube file

Let the conversion begin. Just hit the «Convert» button at the bottom right side of the screen to start ripping DVD to YouTube acceptable file. This might take some time, be patient.

Step 4: Upload to YouTube

We are now ready to put our ripped DVD videos to YouTube on your computer. Again, take a break here because uploading will take time.

That’s it! Good luck!

See also:

How to upload videos — YouTube Help

www.appgeeker.com

How to Rip A DVD with Handbrake for Free

It is very convenience for us to rip DVD with handbrake, for which we can see the movie in our laptop, cellphone or other devices. Handbrake assists you to have wide choice to select the output file of the ripped DVD video, which represents you can change the DVD file into various other type of files through it. Besides it also makes it possible for you to rip the DVD data with handbrake. Handbrake also enables you to create your own video, choose your favorite background picture, music and the effect of it.

Part 2: Rip DVD with 3 best Handbrake alternatives

Top 1: Rip DVD with Handbrake Alternative Tipard DVD Ripper

Tipard DVD Ripper is the most efficient converter. There is an amazing conversion profile library, the files is in a smallest size, the speed of ripping DVD is faster compared with ripping DVD with Handbrake. Just find how to rip DVD with Tipard DVD ripper as below.

Step 1

Load the DVD files to DVD drive

Hit “Load Disc” button to start load the file you want to rip. And you can rip the video into 3D or 2D formats for which you can play the video in different devices. You can also load the video by click “DVD Disc”, “DVD IFO Files” or “DVD Folder”.

Step 2

Select the suitable output file type

Hit the “Profile” arrow then choose the format through the list of “Profile”. Or it is available for you to input the format you want to rip into in the quick search box then you can choose it from the showing list.

Step 3

Edit for ripped videos

If you want to change the effect of the video, you can dine the “Effect” button, for which you can change the effect of the video. If you want to change the length, click “Clip”, and then choose the suitable length. You can get a better result than simply ripping DVD with Handbrake.

Step 4

Rip DVD to video formats

After finishing the last two steps you can hit the “Convert” button to start ripping DVDs, and it will be finished ripping in a really short time. And you can also see the progress from the progress bar.

Top 2: Rip DVD with Handbrake Alternative VCL Media

VCL Media Player supports all kinds of multimedia files, no matter audio or video formats. The program support Mac, Linux, and Windows. What is more, it is a free alternative for Handbrake to rip DVD files. Here is the detailed operation guidance for capturing DVD with VCL as the Handbrake alternative.

Slide 1: Load DVD to VLC Media Player

Hit “Disc” tab and then choose the DVD drive. If you want to convert a commercial DVD you should set VCL to skip the DVD DRM protection or it will record the menu in return.

Slide 2: Convert DVD into Video format

If you don’t need to change the video, you can just click “Convert/Save”. If not, you can click “Show more options” and then you can see what you want to rip DVD files with VLC.

Slide 3: Save the output DVD files

After you click “Convert” there will be a page for you to choose the destination of the converted file and you need to choose the suitable name for the ripped videos. And then you need to select the suitable output file type.

Slide 4: Review the progress

After all these done, there will be a progress bar for you to see the progress of the converting video, which will show you the speed of ripping. It should be an excellent free Handbrake alternative to rip DVD discs.

Top 3: Rip DVD with Handbrake Alternative WinX DVD Ripper

WinX DVD Ripper is another Handbrake alternative to rip DVD disc on Windows. The program is designed for ripping DVD which helps you to backup DVD to hard drive with better protection. And it is available to download to all the system and you can rip DVD to different formats jut as Handbrake.

Step 1: Load the DVD to the program

After download and run this software you can inset the DVD to your computer and load the video by hitting “DVD Disc” button. Or if the video is in the folder, click “DVD Folder”.

Step 2: Choose the suitable output file

When DVD finishing loading, enters the start and end time in the box. And then choose the output file you prefer, you can choose from MP4, MPEG, MOV and etc. If you want to get the extra music, don’t forget to save the MP3 music at the same time.

Step 3: Choose the output folder

Select the output folder by hitting “Browse” button, and then choose the suitable destination folder you want to store this video.

Step 4: Convert DVD to video format

After all these done, you can start convert the DVD with handbrake alternative by clicking “Start”, which you can find it in the main interface. And there will be a progress bar in the page.

Conclusion

The article introduces the method to rip DVD with handbrake and 4 best alternatives. Each one has its own advantages. After reading this article supplies 5 good choices to you when you want to rip DVD and audio which makes it possible for you to watch your favorite videos on your cellphones. If you still have any problem about ripping DVD with Handbrake and alternatives, you can feel free to share more information in the comments.

www.tipard.com

How to rip (copy) DVDs to your computer’s hard drive (7 easy ways)

This tutorial will show you step by step how to rip (copy) DVDs to your computer’s hard drive in a few different ways using free and paid software.

This tutorial should also work for copy or region protected (encrypted) DVDs.


Ripping DVDs

Want to watch a movie from your DVD on your phone, tablet or drive-less laptop?

Do you have a DVD collection that you want to save to an external hard drive?

Then it’s a good idea to rip your DVD to your computer’s hard drive and then copy the video file to your USB flash drive, external hard drive, phone, tablet or drive-less laptop.

What is ripping a DVD?

Ripping a DVD is the process of copying audio and video content from a DVD to a computer’s hard drive.

Ripping is often used to convert DVDs into other video formats such as MP4, MKV, MOV, AVI, MPG, WMV or FLV, and to edit, duplicate or back up the content of a DVD.

WinX DVD Ripper Platinum Review

Are you looking for a reliable DVD ripper?

Do you want a DVD ripper that allows you to rip any DVD to your computer’s hard drive?

Then you will love WinX DVD Ripper Platinum.

WinX DVD Ripper Platinum is a DVD ripper capable of:

  • Ripping DVDs:
    • Into many video formats, such as MP4, AVI, MOV, H.264, MPEG, WMV, FLV, and M2TS.
    • For all kinds of devices, such as iPhone, iPad, iPod, Apple TV, Android (Samsung Galaxy, Lenovo, HTC, etc.), and much more.
    • For sharing on websites, such as YouTube, Facebook, Vimeo, and other websites.
  • Ripping the latest strongly encrypted DVDs (most DVDs you buy from the store have copy or region protection).
  • Editing videos (cutting, trimming, and merging).
  • Delivering quality video in reasonable time.

Ripping a DVD using WinX DVD Ripper Platinum is as easy as loading your DVD, choosing a video format, device or website, and clicking a button.

Learn more > >

How to rip a DVD using WinX DVD Ripper Platinum (easy way)

WinX DVD Ripper Platinum is a very easy to use DVD ripper which can rip and convert your DVD into many video formats and devices.

It can also rip copy and region protected DVDs (most DVDs you buy from the store have copy protection).

Ripping a DVD using WinX DVD Ripper Platinum is as easy as loading your DVD, choosing a video format, device or website, and clicking a button.

You can find WinX DVD Ripper Platinum here.

1. Insert the DVD you want to rip into the DVD drive of your computer.

2. Open WinX DVD Ripper Platinum.

3. Click on DVD Disc located at the top.

4. Select your DVD (if not already selected).

5. Click on OK.

WinX DVD Ripper will now load your DVD and then open a Output Profile window.

6. Select a video format, device or website (YouTube, Facebook, etc.). I always choose MP4 Video.

7. For the best quality, turn the switch to HQ.

Note: Ripping in higher quality will take longer.

8. Click on OK.

9. Make sure that if you rip a movie from DVD that only the main title is selected (usually, it’s already selected by default).

The main title is the one with the longest time duration.


10. If you also want to rip the subtitles, then click on Subtitles Disabled and select the subtitle you want.


11. Click on the RUN button.

WinX DVD Ripper will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.


How to rip a DVD using Wondershare Video Converter Ultimate

Wondershare Video Converter Ultimate is a well-known and very easy to use video converter that can convert almost all video formats.

And:

You can also use it for ripping DVDs to MP4, AVI, WMV, MKV, MPG, MOV, and many other video formats and also to all kinds of devices, such as iPhone, iPad, Samsung Galaxy, PlayStation 3, PlayStation 4, Xbox One, Xbox 360, PSP, and other devices.

You can also rip a copy protected DVD with Wondershare Video Converter Ultimate.

You can find Wondershare Video Converter Ultimate here.

1. Insert the DVD you want to rip into the DVD drive of your computer.

2. Open Wondershare Video Converter Ultimate.

3. Click on Load DVD.


A DVD Load Model window will appear.

4. Select Main Movie and click on OK.

Wondershare Video Converter Ultimate will now load and analyze your DVD.

5. At Target, you click on the ▼ button and select a video format or device.


6. If you want to add subtitles to your video, then make sure that the subtitle is selected.


7. If you want to edit the video (trim, cut, crop, add effect, rotate, etc.), then click on one of the icons located underneath the video thumbnail, edit your video, and then click on OK to save.


8. At Output located at the bottom, you can see and change the location on your computer where Wondershare Video Converter will save the video file.

9. Click on the Convert button.

Wondershare Video Converter Ultimate will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.

How to rip a DVD using WonderFox DVD Ripper Pro

WonderFox DVD Ripper Pro is a very easy to use DVD ripper that can rip and convert your DVD into many video formats and for all kinds of devices.

It can also rip copy and region protected DVDs (most DVDs you buy from the store have copy protection).

You can find WonderFox DVD Ripper Pro here.

There’s also a free version, but the free version can only rip a DVD to MPG (MPEG) format and has fewer functions.

You can download the free version of WonderFox DVD Ripper here.

1. Insert the DVD you want to rip into the DVD drive of your PC.

2. Open WonderFox DVD Ripper Pro.

3. Click on DVD Disc, select the DVD drive and click on OK.

4. Only select the main movie (usually, it’s already selected by default).


5. Click below Output Format on the video format icon (e.g., AVI, MP4, etc.).

6. Select a video format or device.

7. At Output Folder (located at the bottom), you can view and change the location on your computer where WonderFox will save the video file.

To change the location just click on the […] button, select a location and click on OK.

8. Click on RUN.

Wonderfox DVD Ripper will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.

How to rip a DVD to MKV using MakeMKV

MakeMKV is a free DVD ripper that can easily and quickly rip DVDs and Blu-ray discs to high-quality MKV files with a single click.

It can also rip copy protected DVDs (most DVDs you buy from the store have copy protection).

MakeMKV preserves all of the source disc’s information, including tracks, chapters, HD audio, menus, and so on.

You can download MakeMKV here (don’t mind the word BETA because it’s 100% working.).

1. Insert the DVD you want to rip into the DVD drive of your PC.

2. Open MakeMKV.

MakeMKV will now scan for your disc drive.

3. Click on the disc drive icon.


MakeMKV will now read and load your disc.

Once the source DVD is opened you will see its contents as a tree structure. Normally, a disc contains titles (individual clips such as main movie and bonus features).


4. Select which titles you want to save and what tracks to keep in each title.

Here’s what I would do with a movie DVD:

I would uncheck every title except the main title (the main title is the movie and it’s the one with the biggest file size).


Click on the ❱ (right pointing angle bracket) icon of the main title and then uncheck all audio and subtitle tracks you don’t need.


5. At Output folder, you can view and change the location on your computer where MakeMKV will save the video file.

6. Click on the small disc drive button located under Make MKV.

7. You may get a pop-up window like Directory D:/Video/Movie_Name does not exist. Do you want to create it?. If this window appears, you click Yes.

MakeMKV will now rip and convert your DVD to MKV. This may take a while. The amount of time it takes depends on your computer’s hardware and the file size of the DVD.

How to rip a DVD using Handbrake

Handbrake is a well known free video converter that can convert many video formats.

You can also rip DVDs with this video converter.

It can’t rip copy protected DVDs by default (most DVDs you buy from the store have copy protection).

However, there is a way to get around this, by installing libdvdcss and I will also show you how to do this.

You can download Handbrake here.

Tip: If you want to rip a copy protected DVD, then you will need to download the libdvdcss file here for Windows 32-bit and here for Windows 64-bit, and then place the libdvdcss-2.dll file into Handbrake’s program folder (e.g., C:\Program Files\Handbrake).

libdvdcss (or libdvdcss2 in some repositories) is a free and open source software library for accessing and unscrambling DVDs encrypted with the Content Scramble System (CSS).

1. Insert the DVD you want to rip into the DVD drive of your PC.

2. Open Handbrake.

3. Click on the Source button at the top left and click on your DVD.


4. At Destination, you click on the Browse button.

5. Open the location on your computer where you want to save the video file.

6. At File name, you enter a name for your video file and then click on Save.

7. If you want, you can specify presets and custom settings:

  • Presets here you can choose from among the various presets. You can rip your DVD to MP4 or MKV, but also to a few devices like iPhone, iPod, iPad, Android, and Windows Phone.
  • Output Settings here you can specify custom settings such as cropping, applying video filters, adding or removing subtitles, adding audio tracks, create chapter markers, and more.

If you don’t know what all of this means, then just choose a preset.

I always leave the settings as they are. Preset > Universal and Container > MP4.

8. Click on the Start button at the top.

Handbrake will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.

How to rip a DVD using VLC

VLC a free and open source cross-platform (Windows, macOS, Linux, etc.) multimedia player and framework that plays most multimedia files as well as DVD, Audio CD, VCD, and various streaming protocols.

You can also rip DVDs with this media player.

But:

It cannot rip copy and region protected DVDs (most DVDs you buy from the store have copy protection).

You can download VLC Media Player here.

1. Insert the DVD you want to rip into the DVD drive of your computer.

2. Open VLC media player.

3. Click on Media located in the top menu and choose Convert/Save from the drop-down menu.


4. Open the Disc tab.

5. Make sure that DVD is selected.

6. Click on the Convert/Save button at the bottom.

7. At Profile, you select a output video format.

8. Click on the Browse button next to Destination file.


9. Select a location on your computer where you want to save the new video file.

10. At File name, you enter a name for your video or movie (e.g., Breaking Bad) and then click on Save.

11. Click on the Start button.

VLC media player will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.

How to rip a DVD using K3B in Linux (Linux Mint and Ubuntu)

K3b is a well-known CD/DVD burning application for Linux (e.g., Linux Mint and Ubuntu).

With K3b you can also rip DVDs to your computer’s hard drive.

You can install K3b via Software Manager or via the Terminal using the following command line:

sudo apt-get install k3b

To rip a DVD using K3b you will need to install Transcode, which you can install via Software Manager or via the Terminal using the following command line:

sudo apt-get install transcode

1. Insert the DVD you want to rip into the DVD drive of your PC.

2. Open K3b.

3. In the top left section of K3b, you click on your DVD.

4. Click on Start ripping.

A Video DVD Ripping window will appear.

5. Now you will have the following settings:

  • Filetype
  • Video Quality
  • Target Folder (is the location on your computer where K3b will save the video file)
  • Audio Quality

6. Click on the Start button.

K3b will now rip and convert your DVD. This may take a while. The amount of time it takes depends on your computer’s hardware, video file format, and the file size of the DVD.



References:

HowToGeek: How to rip DVDs with VLC

MakeUseOf: 5 simple steps to rip an entire DVD to your hard drive

LifeHacker: How to rip a DVD to your computer

VideoLAN: VLC media player

Wikipedia: libdvdcss

www.easytechguides.com

How to Rip a DVD with 99 Titles Easily on Windows (10) and Mac

Can’t rip DVD with 99 titles problem is solved here. This post will help rip and copy DVDs with 99 titles copy protection to MP4, MOV, AVI, FLV, etc. on PC/Mac.

«I have a DVD with the Disney protection on it. The DVD has 99 titles, which stops me from ripping it to MP4 digital file with HandBrake. Is there a program to rip protected DVD with 99 titles? A standalone and easy-to-use tool is preferred.»

If you are facing the same issue and eager to fix it, just take a few minutes to read this article. Here you can know more about DVDs with 99 titles copy protection, as well as how to rip DVD with 99 titles in a simple way.

Good News! WinX DVD Ripper Platinum now supports 99-title, new, workout, and Japanese DVDs perfectly.

Best 99-Title DVD Ripper

WinX DVD Ripper Platinum – Rip 99-title DVDs and other encrypted DVDs to MP4, MOV, AVI, WMV, FLV, iPhone, iPad, Android, and more formats/devices.

If you’re a mobile user, please click here.

DVD with 99 Titles

In order to prevent people from duplicating and distributing commercial DVDs, DVD producers always include one or more DVD copy protection schemes into a DVD. And 99 titles copy protection is one of the most complicated encryptions, which is widely adopted by Disney, Warner Brothers, Paramount, etc. Generally, only one is the main and right title that contains the full movie content. And others are wrong and fragmentary, used to confuse us. Meanwhile, the file size of a 99-title DVD is usually more than 40 GB. This is why HandBrake can’t rip DVD with 99 titles. And it is not surprising that even some commercial DVD rippers cannot rip 99-title DVD without errors.

When you rip a DVD with 99 titles, for example rip Inside Out DVD, you may face errors like can’t load the DVD, DVD ripper crashes while loading/ripping the DVD, DVD ripping get stuck, can’t select the right title, the output file is screwed up, parts of the movies are skipped or are not in the right place. But all these errors will not happen to WinX DVD Ripper Platinum, a top-notch DVD ripper that can handle DVDs with different copy protections, including DVD with 99 titles.

Best DVD Ripper for 99-title DVD Ripping

As mentioned above, WinX DVD Ripper Platinum is a good option for ripping DVD with 99 titles. Read blow to know more about it.

▶ Available to remove all DVD copy protections, such as DVD CSS, region code, RCE, Sony ArccOS, UOPs, Disney X-project DRM (99 titles DVD encryption included).
▶ Rip regular and copy protected DVDs to MP4, AVI, WMV, MOV, FLV, MPEG, etc. with high quality.
▶ Save DVD to computer. Rip any DVD to iPhone (X/8/7/6S/6/5S), iPad (Pro/Air 2/3/mini 3/4), Apple TV, iPod, Google (Chromecast, New Nexus 7), HTC One (M8), Samsung (Galaxy S8), Microsoft (WP8, Surface, Xbox), Amazon Fire phone, Sony (PSP/PS4), etc.
▶ 1:1 clone DVD to ISO file/DVD folder; copy DVD main/full title content to MPEG2.
▶ Edit video and customize video audio parameters.
▶ Work as a fast DVD ripper thanks to the support for level-3 hardware acceleration, Multi-core CPU use, optimal configuration for newest CUDA and i5 i7 CPU, Super Encode Engine based on MMX- SSE & 3DNow! and Hyper-threading tech.

How to Rip DVD with 99 Titles on PC/Mac?

To begin with, you should download and install the 99-title DVD ripper on your computer.

Step 1. Launch the DVD ripper, and load the DVD with 99 titles by clicking «DVD Disc» button.
Generally speaking, this tool can detect and select the main title from the 99 titles automatically. But if not, you should choose the DVD title manually. Play the 99-title DVD on your DVD player or DVD player software like VLC. While the disc is playing, correctly, you can right-click on the video window and from there VLC will tell you which title of the 99 is playing. And then simply take note of the title, and tick the right title number in WinX DVD Ripper Platinum.

Step 2. Select the output profile for the DVD with 99 titles.
This tool comes with 320+ output formats and 350+ preset profiles. Simply choose one as you like. It is popular to rip DVD to MP4 which is the widely-used format.

Step 3. Set destination folder to save the file ripped from DVD by clicking «Browse» button.

Step 4. Hit «RUN» to begin ripping the DVD with 99 titles to the format you desire.

With this guide, you can easily rip Frozen Disney DVD and other copy-protected DVD movies with 99 titles.

Tips:
Disclaimer: Digiarty Software does not advocate ripping copy-protected DVDs for any commercial purpose and suggests referring to the DVD copyright laws in your countries before doing so.
▶ Still have trouble about how to rip DVD with 99 titles? Please feel free to Email Us >>

If you need a fast protected DVD ripper to rip copy protected/copyrighted DVDs, especially strictly encrypted Disney DVDs, to MP4, Chromecast, AVI, WMV, MPEG, iPhone, iPad, Android/Microsoft devices, please just download WinX DVD Ripper Platinum.

About the Author

   Donna Peng@DonnaPeng

Donna Peng has been working as a copywriter in Digiarty Software for many years. She has written loads of articles to help people handle their DVDs, videos and other stuff.

Related Articles

Home > Resource > Rip 99-Title DVD

www.winxdvd.com

How to Rip DVD Chapters Easily and Fast

As we know, a DVD movie can contain many chapters and titles. But you may just want to get some of the wanted chapters so as to play on your multimedia devices, or save time, or just share on video sites. If you have no idea about this, then you are definitely in the right place here! In this article, you’re going to learn how to rip DVD chapters to any video/audio formats with fast ripping speed and lossless video quality.

To get the work done, you need to get some help from a professional DVD ripping tool. There is a number of DVD Ripping programs available to help you convert your desired DVD chapters. These software programs vary, so you might be confused when you have to choose one. If so, you are recommended to use EaseFab DVD Ripper. With it, you can effortlessly finish your task by converting only the titles you want to separate video files or merge them into a single movie in any popular video formats, including AVI, WMV, MKV, MOV, MP4, FLV, etc. It is rated as the best solution out there to rip DVD chapters to any poular video or audio format.

How to rip DVD chapters effectively

1. Add DVD movies

Launch EaseFab DVD Ripper and click «Load DVD» to select the DVD files from your DVD disc, DVD folder, ISO image file or IFO file to rip. Then loaded files will be displayed on the left source pane with titles listed. You can then select the chapters you want by clicking the checkbox. If you want to export the multiple chapters into one single video, please click «Merge into One File» by right click on the files.

Tips: A DVD may contain many titles more than the main movie, such as the trailers or commercials. By default, EaseFab DVD Ripper choose the longest title which is usually contains the main movie. And this helps ripping without converting unnecessary titles.

2. Select output format

Then click «Profile» and select the format you prefer. As you can see, you can either convert individual chapters to AVI, WMV, MP4, MOV, MKV, FLV, etc. or select a device icon to get videos with optimized settings for iPhone, iPad, iPod, HTC, Samsung, Zune, Motorola, Nokia, etc.

Tips: To select the subtitles you like, simply click Subtitles and select the one you prefer. You can also choose preferred audio track from the Audio drop-down lists.

3. Start to rip your DVD

Finally, click the «Convert» button on the main interface to start ripping your DVD movies to a single video file in the format you’ve selected. After that conversion, click «Open» to located the ripped videos directly and just enjoy them.

easefab.com

How To Rip and Convert Your DVD Collection to ISOs in Windows 7

If you recently purchased a Blu-ray player or getting one soon, one thing you might want to do is backup your current DVD collection. Here we take a look at how to rip and convert your DVD collection to ISO images using free tools with Windows 7.

1. First download and install DVDFab if you don’t have it already. Put your DVD in the drive and launch DVDFab. It’s not free but they do offer a free 30 day trial, and you can always use the DVD Decoder feature for free. DVDFab will open the DVD and pull out it’s information.

2. There are a few things you need to setup before starting the encoding process. Open the Copy DVD section, select Main Movie or Full Disc,  and make sure you have a output target setup for the ripped VOB files. Also, an interesting feature is you can preview individual chapters in the lower left corner.

In this example we’re backing up a Frasier DVD so were selecting Main Movie to get all the episodes on it.

3. Under DVD Copy – Main Movie make sure the chapter with the longest time is selected as shown below and click Next.

4. In the next screen you can create your own Volume Label or go with what it defaults to…if you need to make any changes you can always go back and select different chapters. If everything looks correct click on Start.

5. You can view the progress while the process completes and when it’s done, you’ll get a popup message indicating it completed successfully. Click OK and Finish to close out of DVDFab. Notice it only took 14 minutes to complete which is one reason we like this app.

6. To verify the encoding process was successful, navigate to the location of the ripped VOB files from the DVD. In this example it’s in our Target Output folder which is in C:\Users\i3Geek\Documents\DVDFab…but you can use whatever directory that is convenient for you. In that directory open the Main Movie folder.

7. Then the Volume Label folder.

8. Then the VIDEO_TS folder.

9. In this folder you’ll find the VOB files from the DVD.

10. You should be able to view them in VLC or any media player that plays VOB files like Windows Media Player.

11. It’s always a good idea to take this step so you can verify you ripped what you wanted and the files play successfully.

12. Now it’s time to turn the VOB files into a single ISO image. Download and install ImgBurn if you don’t have it already – installation is easy just follow the wizard and accept the defaults. One thing to point out though is you probably will want to uncheck the boxes when the installer offers to install the Ask Toolbar – unless you want it for some reason.

13. After you have it installed launch ImgBurn. You will see two screens, one is the main control panel and the other is a log screen so you can view the conversion process and check for any errors.

14. From the main control panel click on Create Image file from files/folders.

15. In the next screen under Source click the folder icon to browse for the VOB files.

16. Then browse to the folder you saved the ripped DVD files.

17. Then click on the folder icon under destination to store the ISO image.

18. Browse to a convenient location to save the ISO image and click Save.

19. So here we have the source folder selected and a destination for the ISO. If everything looks good click on the build button to start creating the image.

20. If you didn’t create a Volume Label you’ll get the following message asking if you want to use the one it generated for you…click Yes.

21. You’ll then get an overview of the details and specs for the ISO image. If everything looks correct click OK.

22. Now wait while the image is created. You’ll see the progress while it’s being written and the ImgBurn Log. While the image is being created under Label you might want to check the Close Program box. Otherwise you’ll get a loud annoying sound and message letting you know it completed.

23. After ImgBurn is done creating the ISO image of the DVD, navigate to the location where you saved it and you can start using it. You can watch it with VLC, mount it on a virtual disc drive, or burn it to a blank DVD.

That’s all there is to it! It may seem like a lot of steps, but once you do it a couple times you’ll be converting your DVD collection to ISO files quickly. One thing to keep in mind is when converting a DVD to and ISO, the size is usually going to be 4GB, so make sure you have plenty of disc space if you’re converting a lot.

www.simplehelp.net

Отправить ответ

avatar
  Подписаться  
Уведомление о