How to cut – Cut Video FREE & Quickly

How to Cut /Trim Clips in iMovie with Ease

By Elva | Jun 11,2018 11:43 am


Anyone Knows How to Cut Video Clips into iMovie?


You will find out that iMovie is a very easy software program to use for video editing. This is because it has a user-friendly interface and the processes used are straightforward. There will be no complications to be experienced in cutting a video clip with iMovie so expect a flawless experience. Unlike some other programs that come with complexities, no expertise is required to use iMovie as only grasping the basics will be helpful. Furthermore, there is a tutorial to guide you through any complicated aspects of iMovie so don’t get worried.


Part 1: Cut Video with Ease using iMovie Alternative — Filmora Video Editor


Filmora Video Editor for Mac is the best iMovie alternative in the market and provides the best methods, tools and techniques to perform the video editing easily. Filmora Video Editor enables you to easily make movies , edit audio, apply effects and share your new movie on YouTube, Facebook, Vimeo, DVD, TV, iPhone, iPad, iPod, and more! So cutting a video is just a piece of cake if you are using Filmra Video Editor.


  • Allows users to import media files directly from Facebook or other social media platform.

  • Clear interface for users to easily rotate, split, cut and trim video;

  • Has scene detection feature that can separate a video into several clips according to its scene;

  • Can control the speed, volume of a video and create time lapses to run the video faster or slower.


Filmora is the best iMovie alternative that you can try to cut video on Mac (macOS 10.13 High Sierra included) and Windows. It’s super easy to use. Here is how to cut video using Filmora Video Editor.


Step 1: Download and install Filmora Video Editor


Firstly, download and install Filmora Video Editor on your Mac and then launch it to get to the user interface. Access the “Create New Movie”.


Step 2: Import video to the program


This is a very straightforward step to start with when editing your videos using the software. Here you can touch the «+» icon to import video. Then drag and drop your video to the timeline below for editing.


Step 3: Cut the video


Select the right starting and ending point of the clip that you want to cut. With two clicks on the scissors icon, you will cut the video easily. Right click on the useless video clip. Now you should select «Cut». Soon the cut clip will be removed from the timeline.


Step 4: Export the video file


After that, click «Export» and select the output device and format. Finally, hit the «Create» button to save it.



Part 2. How to Cut or Trim Video in iMovie


As noted above, there are very simple steps used to cut video with iMovie. One thing you need to understand is that once any content has been chopped off from a video clip using iMovie, you will not be able to store it so be very careful on whatever you cut out. Only clips that have been split will be saved. The «split clip at playhead» feature helps to cut a video into two segments while «crop» will help to refine endpoints in any clip up for editing.


In cutting the video, you should use the clip trimmer feature that helps to get rid of unwanted content. It will help you to determine the length of the clip that is in use and that which is not in use. In that way, you will be able to trim video professionally without compromising on quality. Following below steps to cut video in iMovie:


Step 1: Add files by dragging and dropping them to the editing window from the viewing window. You can then select the video to cut and it will turn bluish in color.


Step 2: Have the cursor placed below the viewing window and it should be at the exact position where you want your video fragmented. From the «edit» menu, click on «split video clip at playhead» and it will be cut.


Related Articles & Tips

www.iskysoft.com

How to Cut Your Dog’s Nails

  1. Pets
  2. Dogs
  3. How to Cut Your Dog’s Nails

By Margaret H. Bonham

Unless your dog runs around on hard surfaces that help keep toenails short, you have to cut or clip the nails about once a week — if you hear them clicking on a hard surface, it’s time for a trim.

Most dogs detest having their feet handled, so clipping or trimming may never be your favorite shared activity, but getting your dog used to this ritual at an early stage helps you both weather the process. Try giving your dog a yummy treat after the trimming session, along with a big hug, a boisterous “Good dog!” and a healthy scratch behind the ears.

Before attempting a trim yourself, ask your veterinarian or a groomer to show you how to trim your pup’s toenails them to the right length.

A dog’s toenail is made up of the nail itself and the quick, the pink (when it’s visible) part of your dog’s toenails that provides the blood supply to the nail. Avoid cutting into the quick because it bleeds quite a bit and it’s quite sensitive.

The quick is the dark part inside the nail — the blood supply to avoid!

If you can’t do all your dog’s nails at once, never fear — you can clip them one paw at a time, with other activities or a resting period in between.

To trim your dog’s nails:

  1. Hold the foot steady, but hold it gently.

  2. Snip off a small bit of the end of each toenail.

    Using either the guillotine or scissors-type clippers, place a tiny bit of the nail in the nail clipper and snip.

    If the nail feels spongy while you’re trying to cut it, stop immediately — you’re cutting the quick!

  3. Stop any bleeding immediately.

    If you cut the quick (often called quicking), you’ll have an unhappy dog and a bloody mess. The quick bleeds a great deal, so if you cut it, you need either a nail cauterizer — a tool that stops the bleeding by applying heat — or styptic powder you can apply with a cotton swab. Have a damp washcloth at hand ready to clean up styptic powder and blood as necessary.

    Quicking hurts a lot, and most dogs remember the experience long afterward.

Don’t forget the dewclaws if your dog has them. They tend to grow long because they don’t normally touch the ground and if you fail to cut them, they will eventually grow back into your dog’s foot, which is quite painful.

If you use a nail grinder rather than clippers, use the same method — hold your dog’s foot, turn on the grinder, and grind a little off each nail.


www.dummies.com

How to cut video with VSDC Free Video Editor

It’s quite simple to cut and remove an unwanted fragment from the video. For this purpose select an unnecessary fragment moving blue rectangles on the timeline. For more precision, you can change the time scale using the “Increase/Decrease” buttons or the corresponding slider.

After you have selected the fragment, you can use the “Shift + Delete” hotkey on your keyboard or click the “Cut out fragment” button on the Tools section of the Editor tab. The selected fragment will be immediately removed from the video.

There is one more method to cut video with VSDC Free Video Editor. To use it, click «Cutting and splitting» in object properties or in object menu.

You will see an editor window which enables you to remove fragments from an object. In order to do it, mark the region required for removal and click the «Cut region» button. Then the marked fragment will be deleted and added to the list of deleted fragments on the “Cut Areas” tab. You will be able to restore deleted fragments later, just select the fragment from the list and click the “Remove Area of Deleting” button.

After you have edited your video, click the «Apply changes…» button in the right bottom corner to apply changes to the object. Due to the fact that the duration of the video or audio material will be changed after editing and will not correspond to the duration of the object in the scene, the editor will inform you about it and will offer to set a new duration as per the duration of material.

Please note that the duration of the video or audio material may not correspond to the duration of the object; in this case, depending on selected settings, the video or audio material may:

  • be cut in accordance with the object duration;
  • show the first frame during the set time and then start playing video;
  • play video and show the last frame during the set time.

You can get more information about the program on Free Video Editor’ description page.

 

www.videosoftdev.com

How to Cut Glass: 5 Steps (with Pictures)

Glass (obviously!) For practice I would recommend 3 or 4 mm thick glass., which is not hard to work with but also not to thin to break easily. 2mm is typical glass for picture frames, but can be a difficult thickness before you feel comfortable with how much pressure to put on the cutter. 5 mm and thicker gets harder to break, and can take some courage when it gets really thick. 8mm and up, you need to really put weight on the glass to break it open (I’m talking using your body mass to have enough oomph, and I’m 6’2″ tall !, that’s 190 cm for those outside the US ).

Glasscutter. The picture is showing three, but really just two different kinds. The wooden handled one is easy to find, has spare cutting wheels, but no oil compartment. The two others have oil compartments fitted with a valve at the cutting head that will open up as you push down the cutter to the glass and lets out a steady flow of oil as you cut. Most glassworkers would have both kinds at hand, but as you start I would recommend the wooden one because of price and a few uses the «fancy» ones does not have. (I’ll get back to that)

I went online to look for different cutter, and discovered that it’s not easy to find my kind of wood handle cutter now. ( I got mine a long time a go when I was still working at a glass shop.) Most the model have the ball head, used for hitting the glass to open up the score made in the glass, a method I try to avoid since in my mind the hands on method has a greater success rate.

Oil/lubricant. You do not want to do «dry cuts» on glass, which I will show in the next step, so you need some kind of lubricant. Glass shops normally has a thin clear oil specially made for cutting glass, but my experience is that they prefer to keep this for themselves. (mostly because it’s inconvenient having several people coming by every day asking for a few «drops» for their puny projects) , You can find glass cutting oil on Amazon or other web stores. If you just need a few drops, and your wife has a sowing machine, you could beg her to give you some of the sowing machine oil. It’s very similar to glass cutting oil, but gets a bit pricy if you want to do a lot of cutting. Since my wife has not been willing to share her sowing machine oil, and I am not able to purchase from Amazon ( I live in China), I’ve used WD-40. It works ok, but is not ideal. The bonus is that the long straw you can put on makes it easy to fill the oil compartment of the fancier cutters. You can also use vegetable oil or other oils found in the grocery shop, but they are most times too thick to put in the oil compartment cutters, and more messy and sticky.

Flat work surface. You want the glass to be totally flat, and have good support everywhere. Any bending and tension in the glass will result in the cut/score to run «off track» if you have not already broken the glass in the cutting process. The best surface should be firm and not too soft. you can work on a tile or smooth concrete surface, but it’s easy to damage the glass scratching it and chipping it as you move it around on such a hard surface. The best is a wooden surface covered with felt or something like it. this gives the right firmness and good support, makes it easy to slide the glass around without scratching it, and is forgiving if you should be sloppy and bump the corner/edge of the glass into the work surface.

Measuring tape. Most glass jobs have little leeway, and you want to measure well before you cut. Unlike wood, you can’t just sand/plane down the glass a tad (unless you happen to have a big glass polishing machine hidden behind the junk in your shop).

Straight/angle. If you want a straight cut, you need a straight! You might be steady on your hand and good at following lines, but if you want a true straight cut, get a straight that you can put your cutter up against. That means that the typical thin steal straight or angle will not work, since the wheel on the cutter will lift the glass cutters head too high up to lean on the straight. Ideally you want something between 1/8-1/4 inch thick.

There are many more things you can buy for working with glass, like circle cutter, suction cups, tongs etc. but we will not go there now, since it’s not necessary for just plain cutting.

www.instructables.com

How to cut videos easily and quickly?

Do you want to save the exciting segments from your favourite movies? Are you confused about cut videos from movies? Here is the key! It’s so easy to cut videos from movies with Video Converter.

Xilisoft Video Converter is making video editing simple for everyone to create and share amazing movies. With one-click video-cutting software, friendly interface and fast processing capabilities, you can cut any video clips and turn them into polished movies in just minutes.

Download Video Converter (for free) and start the tutorial!

Step 1: Install and run the software

After installation, run the software. You can see the main interface as below.

Step 2: Add File

Click “Add File(s)” button on the toolbar or select “File> Add File(s)” on the main menu to load files.

Step 3: Cut videos

At first, choose the video file you want to clip. Then click » Clip» button on the toolbar to enter «Clip» window. Set the start & end point to get the partial segment and repeat the action to get several segments at will. After clipping, check the «Output segments as a whole one» option and merge the segments in the list into one file. And then click «Move Up» or «Move Down» button to specify the sequence of these segments.

Tip:

Another easy method: Set start time and length manually

First of all, please preview the video on the right bottom corner preview window and find your favorite part. Then please click the «Advanced Profile Settings» button on the top right panel and set the «Start Time » and «length»,after that click «Enter» on your keyboard. The original video file will become your favorite part quickly.

www.xilisoft.com

How to Cut Plexiglass — Bob Vila

How to Cut Plexiglass 2

Photo: fotosearch.com

In a range of applications, from picture frames to tabletops, plexiglass (also known as acrylic) serves as a cost-effective, shatterproof substitute for glass. In fact, due to its light weight and durability, many do-it-yourselfers prefer plexiglass, not least because it can be cut and shaped with common workshop tools.

Versatile and tough though it may be, plexiglass isn’t perfect. For one thing, it scratches easily. That’s why sheets of the material come covered in a thin layer of protective film. The other downside? Homeowners who don’t know how to cut plexiglass can be intimidated by the material at first—but we’re here to help!

When cutting plexiglass, leave the film in place as long as possible to avoid marring the surface. Second, bear in mind that even if you’re careful, it can be difficult to cut plexiglass without leaving a rough, irregular edge. If your project requires a clean edge, expect to devote energy to smoothing the finish. Simply cutting plexiglass to size is easy by comparison.

Continue reading for details on how to cut plexiglass—the right way.

HOW TO CUT A THIN SHEET OF PLEXIGLASS

How to Cut Plexiglass - Utility Knife

Photo: fotosearch.com

For a thin sheet of plexiglass—that is, material up to about 3/16-inch thick—use a scoring method not dissimilar from a technique used to cut actual glass.

  1. Lay the sheet on a flat surface and, using a yardstick and a permanent marker (or a grease marker), measure and draw the line you wish to cut.
  2. Next, hold the yardstick to the marked line, and run the dull side of a utility knife along the yardstick to score the sheet.
  3. Score again and again, as many as 10 or 12 times, until you have made a deep groove in the plexiglass.
  4. Flip over the plexiglass, and score the opposite side in the same manner.
  5. To finish, hold the scribed line to the edge of your work surface, and secure the plexiglass in place with a clamp. Then, with sharp downward pressure, snap off the portion of the plexiglass that extends beyond the work surface.

HOW TO CUT A THICK SHEET OF PLEXIGLASS

How to Cut Plexiglass - Circular Saw

Photo: fotosearch.com

For thicker sheets of plexiglass, cut with a power saw—be it a circular saw, saber saw, or table saw. (To cut anything but a straight line, opt for a jigsaw.) No matter which type of saw you choose for the task, it’s critically important to use the right blade. There are special blades designed expressly for acrylic, but any metal-cutting blade with carbide tips can do the trick. Before committing to one blade or another, double-check that its teeth are evenly spaced, with no rake, and of uniform height and shape. After readying your tool, measure and mark the plexiglass, then cut as you would any other material, clamping if appropriate. One note of caution: If the blade overheats, the material may chip or crack. Proceed accordingly, water-cooling the blade or pausing your work for a few minutes as needed.

HOW TO POLISH AND BUFF CUT EDGES

Whichever cutting method you choose, you may find that the cut edge doesn’t look terribly attractive. If the cut edge would be visible in your application, take the extra time to sand and buff out the imperfections. Note: You can use a handheld power sander, but manual wet-sanding typically achieves the best results.

  1. Start the process with 120- or 180-grit waterproof sandpaper, in combination with a wood or rubber sanding block.
  2. As the plexiglass becomes smoother, transition to successively finer grits. Finish by sanding with 600-grit paper.
  3. Once you are satisfied with the appearance of the edge, move on to buffing. Outfit your electric drill with a buffing pad and, after applying a polishing compound formulated for plastic, bring the plexiglass edge to a perfect polish.

Every building material comes with a set of quirks and nuances that you can master with practice. Fortunately, it doesn’t take long for do-it-yourselfers with woodworking experience to learn how to cut plexiglass. Although for the time being, you may only need to cut a piece of acrylic down to size, learning to work with this versatile, transparent material opens up a new universe of DIY possibilities that you can explore in myriad projects for years to come.

www.bobvila.com

How To Cut a Cigar: A Comprehensive Guide

The method you use to cut a cigar is less important than how you cut a cigar.

Smoking a cigar is a ritual. It’s all about the process. And that process begins with knowing how to cut a cigar the right way.

Plus, the better the cigar you smoke – maybe you sprung for that Behike 52 when you were overseas? – the more attention you’re going to want to pay to making sure you’re giving it a proper cut, which equates to a better cigar smoking experience.

Here is the definitive HSS guide on how to cut a cigar.

Types of Cigar Caps

Before you cut a cigar, you need to know what you’re working with. There are two main kinds of cigar shapes: parejo and figurado.

A parejo is a cigar that has straight sides and a rounded cap. These are the most common cigar shapes you see out there and include sizes like the Corona, Robusto, Toro, Longsdale and Churchill.

The Oliva Serie V Melanio Figurado was Cigar Aficionado’s No. 1 cigar of 2014. A truly classic smoke.

A figurado refers to any kind of cigar with a non-standard shape. Most commonly we think of figurados having a pointed cap. Common figurados are the Torpedo, Belicoso, Pyramid and Diadema.

Methods for Cutting a Cigar

Three of the most common ways to cut a cigar. L-R: v-cutter, punch and a double-blade guillotine.

Guillotine. The double-blade guillotine is the most common method of cutting a cigar. The cut it delivers is referred to as a straight cut. You can buy them cheaply, but as with anything, you get what you pay for. A poor quality blade will do a literal hack job on your cigar and may even ruin the cap. It’s best to avoid cheaply made plastic and single-blade versions and spring for something a little more solid.

Punch. Unlike a guillotine cigar cutter, which slices off part of the cap, a punch makes about a 1/4″ circular hole in the end of the cap. A cigar punch is very small – the size of a bullet – and can be easier to carry (and lose).

V-Cutter. A v-cutter is one method you don’t see terribly often, but it’s a way to cut a cigar that some people prefer. This kind of cut will expose a lot more surface area of the cigar, therefore making it easier to draw smoke through cigar. One of the negative effects of a v-cut is that it can allow too much smoke through, making the cigar smoke too hot.

Other Methods. There are other ways of cutting a cigar other than the three methods listed above. You will also see special cigar cutting scissors and all manner of round cutters. In a pinch, you can use a sharp knife, a pen or pencil or even your teeth – though it’s best for the cigar and your smoking experience if you use a method listed above.

Which method should you use?

The method you use to cut your cigar is really a matter of personal preference. How you do it is really much more important.

Remember that the objective of any cut is to create a sufficient and smooth opening for smoking without destroying the integrity of the cigar. A proper cut will allow equal draw from the core and rim of the cigar.

How To Cut a Cigar: Straight Cut

The straight cut is my preferred cigar cutting method. It’s quick, easy, and always yields great results. Let’s talk about how to do a proper straight cut on both rounded and pointed cap cigars.

Rounded Cap.

First, examine the cap of the cigar. Look for the “shoulder” of the cigar, or the place where the rounded part of the cap starts to straighten out and flatten. This is where you want to make the cut.

Ideally, you will be cutting about 1/16th of an inch (or 2 millimeters) from the tip.

Put the cigar in your cutter and bring the blades so they are just touching the cigar. Next, cut the cap with swift motion. If you go too slow, you run the risk of ruining the cap as the blade may drag some of the tobacco as it cuts. Another reason to be sure you’re using a high quality blade and why double-bladed cutters are superior.

A proper straight cut on a rounded cap cigar.

Pointed Cap.

The 1/16th of an inch/2 millimeter rule does not apply when cutting a cigar with a pointed cap. The objective here is to remove enough of the cap to expose about the same surface area of the cigar that you would with a straight cut on a cigar with a rounded cap.

How far down the cigar cap you cut will depend on the cigar itself. There’s really no hard and fast rule. Just try to expose enough of the filler tobacco to get an easy draw.

How To Cut a Cigar: Punch

To use a cigar punch, hold the bladed end of the punch against the cap of the cigar. Apply light pressure as you rotate the cigar back and forth. Once the blade pierces the cap, continue rotating and drive the blade a little further into the cigar.

When you remove the punch, the portion of the cap you cut out will be inside the punch. Be careful not to apply too much pressure when punching a cigar as you run the risk of unraveling the cap.

How To Cut a Cigar: V-Cut

A v-cutter is used almost exactly like a guillotine. The biggest consideration when using one is to avoid creating such a large divot in the cigar that it begins to smoke hot.

DON’T MISS: The HSS Guide to Cigar Essentials

Thanks for reading.

Stylishly Yours,

Brian Sacawa
He Spoke Style

Photography by Rob McIver Photo. Shot on location at The QG Office Lounge in Baltimore, MD.

Recommended

1

2

hespokestyle.com

Отправить ответ

avatar
  Подписаться  
Уведомление о